OpenBSD.nu

Tjena!

Har sökt med ljus och lyckta på nätet utan att hitta ett bra svar på mitt problem. Jag kör en burk med ett sämre MSI-moderkort, Amd prolle, samt två nätverkskort.
Burken är tänkt att stå som router samt lite annan grejer. Dock får jag oavbrutet "# * watchdog timeout" när jag belastar linan lite.
Jag får alltså felet på olika nätverkskort och inte ett och samma. Av det jag kunnat utläsa på nätet skulle det kunna vara en IRQ-konflikt, dock har jag testat alla olika lösningar jag kan komma på.

Nätverkskorten som testats är, Realtek, Intel samt Rhino II. Inga bra grejer kanske men Realtek och Intel funkar utmärkt när jag kör med Intel. Är det nån som har stött på samma problem?

#dmesg
OpenBSD 4.6 (GENERIC) #53: Thu Jul  9 21:19:22 MDT 2009
deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1876951040 (1790MB)
avail mem = 1809002496 (1725MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0000 (36 entries)
bios0: vendor Phoenix Technologies, LTD version "V1.5" date 07/27/2007
bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7253
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+, 2400.30 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
mpbios0: bus 0 is type PCI   
mpbios0: bus 1 is type PCI   
mpbios0: bus 2 is type PCI   
mpbios0: bus 3 is type PCI   
mpbios0: bus 4 is type PCI   
mpbios0: bus 128 is type PCI   
mpbios0: bus 1 is type ISA   
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 3, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0 apid 3 pa 0xfecc0000, version 3, 24 pins
mpbios: WARNING: pin 31 for apic 3 too high; assuming ACPI global int value
mpbios: WARNING: pin 27 for apic 3 too high; assuming ACPI global int value
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "VIA K8M890 Host" rev 0x00
agp at pchb0 not configured
pchb1 at pci0 dev 0 function 1 "VIA K8M890 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8M890 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8M890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8M890 Host" rev 0x00
"VIA K8M890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 7 "VIA K8M890 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA DeltaChrome Video" rev 0x11
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 2 function 0 "VIA K8T890 PCI-PCI" rev 0x00: apic 3 int 3 (irq 5)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 3 function 0 "VIA K8T890 PCI-PCI" rev 0x00: apic 3 int 7 (irq 5)
pci3 at ppb2 bus 3
pciide0 at pci0 dev 15 function 0 "VIA VT8237A SATA" rev 0x80: DMA
pciide0: using apic 2 int 21 (irq 11) for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: <HDT722516DLAT80>
wd0: 16-sector PIO, LBA48, 157066MB, 321672960 sectors
wd1 at pciide1 channel 0 drive 1: <SAMSUNG SP1604N>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, DMA mode 2
wd1(pciide1:0:1): using PIO mode 4, DMA mode 2
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRRW GSA-4164B, 1.01> ATAPI 5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, DMA mode 2
viapm0 at pci0 dev 17 function 0 "VIA VT8237A ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x2f 00=c2 01=0f 02=00 03=00 04=07 05=00 06=18 07=00 08=00 14=14 15=62 16=02 17=05 words 00=c2ff 01=0fff 02=00ff 03=00ff 04=07ff 05=00ff 06=18ff 07=00ff
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
pchb7 at pci0 dev 19 function 0 "VIA VT8237A PCI-PCI" rev 0x00
ppb3 at pci0 dev 19 function 1 "VIA VT8237A PCI-PCI" rev 0x00
pci4 at ppb3 bus 4
rl0 at pci4 dev 4 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq 11), address 00:30:bd:20:96:00
rlphy0 at rl0 phy 0: RTL internal PHY
em0 at pci4 dev 5 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int 18 (irq 10), address 00:1b:21:12:c5:a8
pchb8 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb9 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb10 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev BH-G2
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x68
lm1 at wbsio0 port 0x290/8: W83627EHF
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

#vmstat -i
interrupt                        total    rate
irq0/clock                   19254     100
irq14/pciide1                 1474        7
irq17/rl0                     10343       53
irq18/em0                        74        0
irq1/pckbc0                    629        3
Total                           31774    165

Mvh
HurricaneHill